DuyMinh Software
Bạn có muốn phản ứng với tin nhắn này? Vui lòng đăng ký diễn đàn trong một vài cú nhấp chuột hoặc đăng nhập để tiếp tục.

DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản

Go down

DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản Empty DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản

Bài gửi  duyminh Wed Mar 31, 2010 3:08 pm

DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản Dmscanh20bao20anh20sang
DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản Dmslightdarkdetectorala
DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản Dmstonegeneratorcontrol
DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản Dmslightactivatedswitch

DayLight Alarm, Control with light using IC 555 - Cảnh báo ánh sáng đơn giản

This the Tone Generator circuit that interesting because of can control the sound has with the light. By use the integrated circuit NE555 be pillar equipment , which perform produce sound frequency in model Astable Multi vibrator or pulse generator. And use 25 ohm small-sized loudspeakers. For the equipment detects the light. I uses LDR because of be usable good easy and economize with. For tone sound use can fine C1 get. by many values , make the low voice but when the value is a little make tall sound goes up. The detail is other see in the circuit better.

**************

Today we come to see the circuit detects the light by have a voice warn. When meet the light or be become dark depend on using S1 ( follow the circuit ). For this my circuit uses the integrated circuit IC 555 be pillar equipment again. You can choose can use many the number be LM555 or NE555 or use the number instead of eat the low beam be IC 7555 all right. For that circuit when S1 stay in a position . And there is the light shines at LDR (Photoresistor) a loudspeaker will utter. When S1 stay in a position and have no the light at LDR loudspeaker utter also. This easy good circuit friends may have fun IC 555 detector light this please sir.

***************
The circuit presented here wakes you up with a loud alarm at the break of the daylight. Once again the 555 timer is used here. It is working as an astable multivibrator at a frequency of about 1kHz.
The circuit's operation can be explained as follows:
When no light falls on the LDR, the transistor is pulled high by the variable resistor. Hence the transistor is OFF and the reset pin of the 555 is pulled low. Due the this the 555 is reset.
When light falls on the LDR, its resistance decreases and pulls the base of the transistor low hence turning it ON. This pulls the reset pin 4 of the 555 high and hence enables the 555 oscillator and a sound is produced by the speaker.

The variable 100K resistor has to be adjusted to set the light intensity that triggers the alarm.

********************

Đây là mạch báo động ánh sáng. Được sử dụng trong phòng tối và khi có ánh sáng lọt vào thì mạch sẽ phát ra tiếng báo cho ta biết là có ánh sáng

Nhìn vào mạch trên khá là đơn giản vì mạch chỉ sử dụng 1 con 555 để tạo dao động phát âm thanh ra loa và 1 con LDR cảm biến ánh sáng.
+ 555 ở đây là con tạo dao động xung vuông trong mạch này nó tạo dao động là 1Khz cấp cho tải là Loa
+ LDR là cảm biến ánh sáng. Khi không có anh sáng thì cảm biến này có giá trị điện trở là vô cùng còn khi có ánh sáng đủ mạch thì cảm biến có giá trị điện trở là 0.
Khi có ánh sáng thì LDR sẽ có điện trở bằng 0 khi đó nó sẽ phân cực thuận cho con BC158 dẫn đến cấp điện áp vào chân 4 của 555 là mạch dao động 555 hoạt động và phát âm thanh ra loa. Còn khi không có ánh sáng thì LDR có giá trị điện trở vô cùng do đó nó ko phân cực được cho BC158 ==> Không có tín hiệu ra loa. Biến trở 100K dùng để điều chỉnh mức cường độ ánh sáng cảnh báo.

duyminh
duyminh

Tổng số bài gửi : 2887
Points : 5567
Reputation : 83
Join date : 12/09/2008
Age : 42
Đến từ : http://diendan.phamduyminh.com

http://www.phamduyminh.com

Về Đầu Trang Go down

Về Đầu Trang

- Similar topics

 
Permissions in this forum:
Bạn không có quyền trả lời bài viết