DuyMinh Software
Bạn có muốn phản ứng với tin nhắn này? Vui lòng đăng ký diễn đàn trong một vài cú nhấp chuột hoặc đăng nhập để tiếp tục.
Tìm kiếm
 
 

Display results as :
 


Rechercher Advanced Search

Liên kết
DuyMinh Software
Minh Hoang HiTech
Music

Máy biến áp cách ly - Isolation Transformer

2 posters

Go down

Máy biến áp cách ly - Isolation Transformer Empty Máy biến áp cách ly - Isolation Transformer

Bài gửi  duyminh Tue Apr 20, 2010 11:32 am

Máy biến áp cách ly - Isolation Transformer LogoDMS
Máy biến áp cách ly - Isolation Transformer Dms028099minh
Máy biến áp cách ly - Isolation Transformer Dms440sqtransformersmin
Máy biến áp cách ly - Isolation Transformer Dms549pxtrenntransforma
Máy biến áp cách ly - Isolation Transformer Dmsc2b6ac70b685fef1419e
Máy biến áp cách ly - Isolation Transformer Dmscachmacday4minh
Máy biến áp cách ly - Isolation Transformer Dmscurrenttransformermi
Máy biến áp cách ly - Isolation Transformer Dmsdata5068minh
Máy biến áp cách ly - Isolation Transformer Dmsgheploivaohopminh
Máy biến áp cách ly - Isolation Transformer Dmsisolationtransformer
Máy biến áp cách ly - Isolation Transformer Dmsisolationtransformerh
Máy biến áp cách ly - Isolation Transformer Dmsketthucminh
Máy biến áp cách ly - Isolation Transformer Dmsmfgis1000hg20rearmin
Máy biến áp cách ly - Isolation Transformer Dmssinglephaseisolation
Máy biến áp cách ly - Isolation Transformer Dmstunglopdayminh

Máy biến áp cách ly - Isolation Transformer

Máy biến áp cách ly, ổn áp cách ly chống giật: giải pháp an toàn tuyệt đối cho máy ATM, máy bán hàng tự động, màn hình quảng cáo LCD, khung tranh điện tử, hệ thống âm thanh và các thiết bị rò rỉ điện khác.

Máy biến áp cách ly là dạng máy biến áp có cuộn sơ cấp và cuộn thứ cấp quan độc lập với nhau giữa chúng chỉ có mối liên hệ từ thông.Chúng được sử dụng phổ biến trong các ngành chế tạo biến áp điện lực, ngành chế tạo biến áp an toàn, ưu điểm:
- Dễ chế tạo và sử dụng
- Chống nhiễu khi lưới điện dao động

1 /. Ý nghĩa kỹ thuật:

- Biến áp cách ly là loại biến áp có cuộn dây sơ cấp và (các) cuộn dây thứ cấp chỉ ghép với nhau bằng từ, không ghép bằng điện, nên cách biệt và độc lập nhau về điện (các cuộn sơ cấp và cuộn thứ cấp rời nhau) .

- Trong biến áp cách ly, điện áp sơ cấp đi vào cuộn sơ cấp và sinh ra từ trường biến thiên. Theo định luật cảm ứng điện từ Faraday, sẽ xuất hiện một sức điện động cảm ứng ở các cuộn thứ cấp. Tùy vào sự chênh lệch số vòng dây giữa cuộn sơ cấp và các cuộn thứ cấp mà có tương quan điện áp khác nhau, có thể tăng thế hay hạ thế (so với điện áp sơ cấp).

2 /. Tính chất:

- Bất kỳ điểm nào trên cuộn thứ cấp (cuộn hạ áp) đều có hiệu điện thế bằng 0 so với mặt đất, nên ta không bị điện giật khi chạm người vào hạ áp hay thiết bị vỏ.

- Cuộn dây sơ cấp và (các) cuộn dây thứ cấp có các đường đặc tính Volt-Ampere khác nhau.

- Hiệu quả truyền công (truyền năng lượng hay thông tin) giữa dây cuộn sơ cấp và các cuộn dậy thứ cấp làm độ hỗ cảm quyết định.

2 /. Cơ sở toán học:

Các chỉ tiêu chung cho biến áp, trong đó có biến áp cách ly:

m là hệ số biến áp (biến áp suất).
M là độ hỗ cảm của 2 cuộn dây (Mutual cảm ứng).
Lprim = Độ tự cảm của cuộn sơ cấp
Lsec = Độ tự cảm của cuộn thứ cấp
Nsec = Số vòng thứ cấp.
NPrim = Số vòng sơ cấp.

Công thức:

Lprim.Lsec = M.M

m = M / Lprim = Lsec / M

m = Lsec / Lprim = (usec / Uprim) x M = (Nsec / Nprim) x M

3 /. Ứng dụng:

- Máy hàn điện, máy nạp accu, các biến áp nguồn (đổi điện từ điện lưới AC xuống thành các điện áp nhỏ 12 VDC, 5 VDC ... trong các máy móc điện tử vv ...

- Các bộ nguồn xung cũng dùng biến áp cách ly để cô lập nguồn cao áp nan từ lưới điện với các mức điện áp ngã ra -> chống giật cho các mạch điện, các thiết bị mà nó cung cấp. Mạch nguồn máy tính và biến áp siêu áp là một trong những ứng dụng cách ly máy biến áp.

- Biến áp cách ly để phát và thu tín hiệu điều khiển trên đường dây cấp điện hay có liên quan đến đường dây cấp điện, như biến áp dùng trong kỹ thuật (Power Line Communication)


****************

An isolation transformer is a transformer, often with symmetrical windings, which is used to decouple two circuits. An isolation transformer allows an AC signal or power to be taken from one device and fed into another without electrically connecting the two circuits. Isolation transformers block transmission of DC signals from one circuit to the other, but allow AC signals to pass. They also block interference caused by ground loops. Isolation transformers with electrostatic shields are used for power supplies for sensitive equipment such as computers or laboratory instruments.

In electronics testing, troubleshooting and servicing, an isolation transformer is a 1:1 power transformer which is used for safety. Grounded objects (desk, lamp, concrete floor, oscilloscope ground lead, etc.) near a device under test which is not isolated may be at a hazardous potential difference with respect to that device. By using an isolation transformer, the bonding is eliminated, and the shock hazard is entirely contained within the device—there is no danger in touching a live part of the circuit while another part of the body is at earth potential.

Isolation transformers are also used for the power supply of devices not at ground potential. A well-known example is the Austin transformer for the power supply of air-traffic obstacle lamps on mast radiators insulated against ground.

Isolation transformers are commonly designed with careful attention to capacitive coupling between the two windings. This is necessary because excessive capacitance could also couple AC current from the primary to the secondary. A grounded shield is commonly interposed between the primary and the secondary. This greatly reduces the coupling of common-mode noise present on supply conductors.

Differential noise can magnetically couple from the primary to the secondary of an isolation transformer. This requires other measures, such as a filter, to block differential noise from the secondary of an isolation transformer.

Bare uncased isolation transformers have floating outputs (not tied to ground). Most commercial isolation transformer assemblies sold have one leg of the secondary tied to ground as a safety requirement. This forms a new neutral which eliminates common mode noise, and differential ground noise, prime functions when used to power equipment.

***************
Isolation transformers

Safety and prevention of galvanic corrosion

The isolation transformer eliminates any electrical continuity between AC shore power and the boat.
It is essential for safety and eliminates the need for galvanic isolators and polarity alarms

Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or a GFCI (Ground
Fault Current Interrupter) will trip in case of a short circuit or current leakage to ground. Connecting the
ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see
below). Bringing only the live and neutral wire on board results in an unsafe situation because GFCI’s will
not work nor will a fuse blow in case of a short circuit to a metal part on the boat.

Galvanic corrosion occurs when two dissimilar metals in electrical contact are simultaneously exposed to
an electrically conducting fluid. Seawater and, to a lesser extent, fresh water are such fluids. In general, the
more active alloy of the couple corrodes preferentially while the less active (more noble) material is
cathodically protected. The rate of galvanic corrosion is a function of several variables including area
ratios, conductivity of the fluid, temperature, nature of the materials, etc.

It is a misunderstanding that galvanic corrosion occurs only in metal and aluminium hulls. In fact it can
occur on any boat as soon as a metallic part (the shaft and propeller) is in contact with water. Galvanic
corrosion will quickly dissolve your sacrificial anodes, and attack the shaft, propeller and other metal parts
in contact with water as soon as the boat is connected to the shore-side supply.
It might therefore be tempting not to connect the ground conductor: this is however extremely dangerous
because GFCI’s will not work nor will a fuse blow in case of a short circuit to a metal part on the boat.

The best solution to avoid galvanic corrosion and at the same time prevent any unsafe situation is to
install an isolation transformer to connect to the shore-side supply.

The isolation transformer eliminates any electrical continuity between shore power and the boat. The shore
power is fed to the primary side of the transformer and the ship is connected to the secondary.
The isolation transformer completely isolates the boat from the shore ground. By connecting all metal parts
to the neutral output on the secondary side of the transformer, a GFCI will trip or a fuse will blow in case of
a short circuit.

Soft start is a standard feature of a Victron Energy isolation transformer. It will prevent the shore power
fuse from blowing due to the inrush current of the transformer, which would otherwise occur.

It is also recommended, for optimal safety, to connect the secondary neutral of the transformer to ground
when the boat is out of the water

Liên hệ:
[You must be registered and logged in to see this link.]
(08) 39 71 77 97
duyminh
duyminh

Tổng số bài gửi : 2887
Points : 5567
Reputation : 83
Join date : 12/09/2008
Age : 42
Đến từ : http://diendan.phamduyminh.com

http://www.phamduyminh.com

Về Đầu Trang Go down

Máy biến áp cách ly - Isolation Transformer Empty Re: Máy biến áp cách ly - Isolation Transformer

Bài gửi  nganhnam Mon May 17, 2010 10:50 pm

thx

nganhnam

Tổng số bài gửi : 9
Points : 18
Reputation : 9
Join date : 17/05/2010

Về Đầu Trang Go down

Về Đầu Trang

- Similar topics

 
Permissions in this forum:
Bạn không có quyền trả lời bài viết