Tìm kiếm
 
 

Display results as :
 


Rechercher Advanced Search

Liên kết
DuyMinh Software
Minh Hoang HiTech
Music
Keywords

tes824  dien  winzip  Thanh  


Power supply failure alarm

Go down

Power supply failure alarm Empty Power supply failure alarm

Bài gửi  duyminh on Wed Mar 31, 2010 4:12 pm

Power supply failure alarm Dms2minh

Power supply failure alarm

Most of the power supply failure indicator circuits need a separate power supply for themselves. But the alarm circuit presented here needs no additional supply source. It employs an electrolytic capacitor to store adequate charge, to feed power to the alarm circuit which sounds an alarm for a reasonable duration when the supply fails.
This circuit can be used as an alarm for power supplies in the range of 5V to 15V.
To calibrate the circuit, first connect the power supply (5 to 15V) then vary the potentiometer VR1 until the buzzer goes from on to off.
Whenever the supply fails, resistor R2 pulls the base of transistor low and saturates it, turning the buzzer ON.

If there are any problems please contact [You must be registered and logged in to see this link.]

_________________
Website: ([You must be registered and logged in to see this link.]
Forum: (http://forum.phamduyminh.com)
(http://diendan.phamduyminh.com)

Let's share to be shared.
Hãy chia sẻ để được sẻ chia.

PostReply to see hidden links.
duyminh
duyminh

Tổng số bài gửi : 2887
Points : 5567
Reputation : 83
Join date : 12/09/2008
Age : 38
Đến từ : http://diendan.phamduyminh.com

Xem lý lịch thành viên http://www.phamduyminh.com

Về Đầu Trang Go down

Về Đầu Trang


 
Permissions in this forum:
Bạn không có quyền trả lời bài viết